welcome to the tech section
5 posters
Page 1 of 1
welcome to the tech section
I think it would only be proper to start this section off with a decent write up. What would you guys like to learn more about or just have some info on. Lets heat dome suggestions and ill make the write up.
NOVAKOREY- Rookie
- Posts : 13
Join date : 2013-02-26
Age : 29
Location : kingsport
Re: welcome to the tech section
Shs high torque or Lonex high torque?
NOVAAndy- Rookie
- Posts : 5
Join date : 2013-02-26
Age : 26
Location : Tri-Cities
Re: welcome to the tech section
Well generally speaking the lonex is way better. However for a more precise write up what will the setup be for the two motors
NOVAKOREY- Rookie
- Posts : 13
Join date : 2013-02-26
Age : 29
Location : kingsport
Re: welcome to the tech section
The lonex runs a lot cooler. But they arent available right now.
Rapax97- Rookie
- Posts : 1
Join date : 2013-02-26
Location : Gray, Tn
Re: welcome to the tech section
The lonex a2 is in the 18-22 tpa (turns per armature )
The Shs high torque is 16 tpa( turns per armature )
Higher tpa = more torque and less speed
less tpa = more speed less torque
16 tpa is a good baseline for torque
12-14 tpa is a good balance for speed
The Shs motors run really hot which is not good for the armature itself or the commutator
I prefer a
The Shs high torque is 16 tpa( turns per armature )
Higher tpa = more torque and less speed
less tpa = more speed less torque
16 tpa is a good baseline for torque
12-14 tpa is a good balance for speed
The Shs motors run really hot which is not good for the armature itself or the commutator
I prefer a
NOVAKOREY- Rookie
- Posts : 13
Join date : 2013-02-26
Age : 29
Location : kingsport
Re: welcome to the tech section
you prefer a what? LolNOVAKOREY wrote:The lonex a2 is in the 18-22 tpa (turns per armature )
The Shs high torque is 16 tpa( turns per armature )
Higher tpa = more torque and less speed
less tpa = more speed less torque
16 tpa is a good baseline for torque
12-14 tpa is a good balance for speed
The Shs motors run really hot which is not good for the armature itself or the commutator
I prefer a
*NovaLogan*- Rookie
- Posts : 4
Join date : 2013-02-26
Re: welcome to the tech section
Oops. I Ment to type that I prefer a lonex a2 or 1 over just about anything
NOVAKOREY- Rookie
- Posts : 13
Join date : 2013-02-26
Age : 29
Location : kingsport
Re: welcome to the tech section
Agreed.NOVAKOREY wrote:Oops. I Ment to type that I prefer a lonex a2 or 1 over just about anything
*NovaLogan*- Rookie
- Posts : 4
Join date : 2013-02-26
Re: welcome to the tech section
Hello, airsoft community. Check out WoodsNinja556 on Youtube, as I can't upload links right now. We upload special projects and customer guns if we get the chance. If you have a request, we will do our best to comply.
NOVA-Ninja- Rookie
- Posts : 7
Join date : 2013-02-26
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum